New advanced, super high-quality, fast, ultra-wide-angle zoom lens
SP 15-30mm F/2.8 Di VC USD G2 (Model A041)
August 31, 2018, Saitama, Japan–Tamron Co., Ltd. (President & CEO: Shiro Ajisaka), a leading manufacturer of optics for diverse applications, announces the launch of a new high-speed ultra-wide-angle zoom lens, the SP 15-30mm F/2.8 Di VC USD G2 (Model A041), for full-frame DSLR cameras.
With a well-established reputation for ultra-high-quality wide-angle zoom lenses with its Model A012, Tamron carries on the tradition of high optical performance with the new SP 15-30mm F/2.8 Di VC USD G2 (Model A041). By incorporating an XGM (eXpanded Glass Molded Aspherical) lens element, as well as multiple LD (Low Dispersion) lens elements, the distortion and lateral chromatic aberrations so common in wide-angle shooting have been greatly minimized. Furthermore, a newly developed AX (Anti-reflection eXpand) Coating has been applied to reduce ghosting and flare more thoroughly than ever before. The optical performance in this high-speed F/2.8 ultra-wide-angle zoom lens with a focal length starting at 15mm is outstanding. In addition, the built-in Dual MPU (Micro-Processing Unit) enables vastly improved AF speed and precision, and image stabilization. This is a next-generation super high-quality, high-speed ultra-wide-angle zoom lens with first-rate optics and a wide range of features that serve to revitalize the shooting experience. With the release of this model, three* of Tamron’s high-speed F/2.8 zoom lens with VC (Vibration Compensation) are now G2 (Generation 2).
|PRODUCT NAME||SP 15-30mm F/2.8 Di VC USD G2 (Model A041)|
|DATE OF LAUNCH||The Nikon mount model: September 21, 2018
The Canon mount model: October 12, 2018
*SP 15-30mm F/2.8 Di VC USD G2 (Model A041), SP 24-70mm F/2.8 Di VC USD G2 (Model A032), SP 70-200mm F/2.8 Di VC USD (Model A025)
1. Super high-quality high-speed ultra-wide-angle zoom lens
The Model A041 is an F/2.8 ultra-wide-angle lens with a focal length starting at 15mm that offers high resolution even in the peripheral area of the image. By incorporating an XGM (eXpanded Glass Molded Aspherical) lens element and multiple LD (Low Dispersion) lens elements to curtail distortion and lateral chromatic aberrations, Tamron has achieved a degree of resolution throughout the range that is just as good as a fixed focal length lens.
2. Newly developed AX Coating
The AX (Anti-reflection eXpand) Coating, especially effective for wide-angle lenses that tend to let in harmful light from peripheral areas, was developed to control rays that affect image quality. It is a revolutionary new proprietary coating developed in-house by Tamron using specialized deposition technology. The new coating keeps the reflection factor for peripheral areas at the same high level as that for the center area, not only overcoming standard curvature issues, but even overcoming the problems of conventionally produced convex surface with large curvatures for which uniform deposition has always proved difficult to achieve. Furthermore, the Model A041, along with eBand (Extended Bandwidth & Angular-Dependency) Coating utilizing nanotechnology, and BBAR (Broad-Band Anti-Reflection) Coating, makes effective use of three different types of coatings, thereby enabling unsurpassed curtailment of ghosting and flare and consequently enabling superlative, exceptionally clear image quality edge to edge.
3. High-speed, high-precision AF
Superb AF speed and precision is delivered by equipping the lens with a Dual MPU (Micro-Processing Unit) system and employing an enhanced AF control algorithm to improve performance. The AF drive uses proprietary Tamron technology, USD (Ultrasonic Silent Drive), enabling high torque, high response, and silent operation. And because it comes with a Full-time Manual Focus override system, manual focus adjustments can be made on the fly.
4. VC promises sharp images for all varieties of shooting
Tamron released the first high-speed F/2.8 ultra-wide-angle zoom lens in the world equipped with a VC (Vibration Compensation) mechanism, the original Model A012. The new Model A041 has been further improved with a newly developed VC mechanism that surpasses former versions and reaches 4.5 stops*, according to CIPA standards. This makes it possible to shoot sharp photos over a wide range of photographic scenes, including indoor and outdoor shots as well as handheld shots at stopped-down aperture settings for landscape photography.
* CIPA Standard Compliant. For Canon: EOS-5D MKIII is used. For Nikon: D810 is used.
5. Rear filter holder
The Model A041 made for use on Canon (EF-mount) cameras comes with a filter holder as a standard feature that lets you insert gelatin and other sheet filters into the rear side of the lens. This makes photography using filters much easier and simpler by overcoming the problem of the curvature of the front lens elements that made shooting with filters so difficult in the past.
6. Vastly improved highly durable Fluorine Coating
Abrasion resistance capability has been vastly improved on the new Model A041. The front surface of the lens element is coated with a Fluorine Coating based on a newly developed fluorine compound with high water- and oil-repellent properties. The lens surface is easier to wipe clean and is less vulnerable to the damaging effects of dirt, dust, moisture, and fingerprints, and enabling your important lenses to be continually protected on a long-term basis.
7. The new design provides greater operability and design consistency
With the new SP design applied, Model A041 shares the same feel of high quality and operability as the other two models in this series, SP 24-70mm F/2.8 Di VC USD G2 (Model A032) and SP 70-200mm F/2.8 Di VC USD G2 (Model A025). Tamron has merged beautiful craftsmanship with intuitive design in this new high-speed ultra-wide-angle zoom lens. Even details like the shape of the switch box, distance-scale window, and the precision and stability of the metallic mount reveal a commitment to functionality, as well as design. The result is a next-generation lens that’s easy to use, yet loaded with cutting-edge technology.
8. Compatible with TAMRON TAP-in ConsoleTM, an optional accessory
The new Model A041 is compatible with the TAMRON TAP-in Console, an optional accessory product that provides a USB connection to a personal computer for easy updating of the lens’s firmware as well as customization of features including fine adjustments to the focus position of AF and VC control.
9. Moisture-Resistant Construction
Seals are located at the lens mount area and other critical locations to prevent infiltration of moisture and/or rain to provide Moisture-Resistant Construction. This feature affords an additional layer of protection when shooting outdoors under adverse weather conditions.
10. Manufacturing innovation with thorough attention to details based on the rigorous quality standards worthy of the SP series
Tamron has enhanced the SP series lenses to fulfill high-level photographic requirements and provide the pleasure of ownership. While introducing a new exterior design, Tamron reviewed the SP series standards. The new SP series has been developed by setting rigorous standards for design, manufacturing and quality that apply to the optical design and mechanical design as well as such wide-ranging areas as the product’s robustness and improvements in a variety of individual functions. This has helped to achieve a more consistently superb optical performance, making it a lens that fulfills the demand for higher image quality that is compatible with the latest high-pixel cameras. To maximize the optical performance of the SP series, Tamron will continue to enhance the accuracy of the component parts of each lens element unit and improve the mechanical precision of the entire lens, thereby achieving a high overall performance.
|Angle of View (diagonal)||110°32' - 71°35' (for full-frame DSLR cameras)
85°52' - 49°54' (for APS-C format DSLR cameras)
|Optical Construction||18 elements in 13 groups|
|Minimum Object Distance||0.28m (11 in) Full zoom range|
|Maximum Magnification Ratio||1:5 (f=30mm)|
|Length**||for Canon 145mm (5.7 in)
for Nikon 142.5mm (5.6 in)
|Weight||for Canon 1,110g (39.2 oz)
for Nikon 1,100g (38.8 oz)
|Aperture Blades||9 (circular diaphragm)***|
|Image Stabilization Performance||4.5 stops (TELE) (CIPA Standards Compliant)
For Canon: EOS-5D MKIII is used / For Nikon: D810 is used
|Standard Accessories||Integrated flower-shaped hood, Lens caps (push-on front, rear), Lens pouch|
|Compatible Mounts||Canon EF mount, Nikon|